menuMENU    UK Free TV logo Archive (2002-)

 

 

Click to see updates

Analogue and digital signal strength

The strength of an analogue signal is no guide to the strength of a digital signal

The strength of an analogue signal is no guide to the strength
published on UK Free TV

Many people ask why they can receive an OK analogue picture, but need to upgrade their aerial to get Freeview, or sometimes get perfect Freeview reception when the analogue picture is very poor.

The digital signals are currently broadcast at low power (this will change as switchover happens) to prevent interference with the existing analogue signals. Thankfully most Freeview boxes can work with these weak signals. The following list shows the strength of the digital signal compared to the analogue for the 80 Freeview transmitters.

Expr2 Aberdare: 15%
Angus: 2000%
Beacon Hill: 1%
Belmont: 1.43%
Bilsdale: 1.15%
Black Hill: 4%
Blaenplwyf: 1.66%
Bluebell Hill: 8.88%
Bressay: 10%
Brierley Hill: 1.22%
Bristol Kings Weston: 4.5%
Bromsgrove: 1550%
Brougher Mountain: 0.5%
Caldbeck: 0.82%
Caradon Hill: 0.76%
Carmel: 2%
Chatton: 4.16%
Chesterfield: 1.8%
Craigkelly: 2%
Crystal Palace: 2%
Darvel: 2%
Divis: 0.49%
Dover: 1%
Durris: 2%
Eitshal: 0.8%
Emley Moor: 0.93%
Fenham: 1%
Fenton: 0.5%
Guildford: 1%
Hannington: 4%
Hastings: 18.3%
Heathfield: 1.2%
Hemel Hempstead: 2%
Huntshaw Cross: 3.66%
Idle: 2%
Ilchester Crescent: 4%
Keelylang Hill: 1%
Keighley: 0.91%
Kilvey Hill: 3.83%
Knock More: 1%
Lancaster: 1.83%
Lark Stoke: 416.66%
Limavady: 0.8%
Llanddona: 1%
Malvern: 10%
Mendip: 1.83%
Midhurst: 1.25%
Moel-Y-Parc: 0.41%
Nottingham: 1.85%
Olivers Mount: 9.1%
Oxford: 1.6%
Pendle Forest: 18.2%
Plympton: 9.15%
Pontop Pike: 1.93%
Pontypool: 6%
Presely: 0.83%
Redruth: 1.85%
Reigate: 1500%
Ridge Hill: 2%
Rosemarkie: 10%
Rosneath: 2%
Rowridge: 4%
Rumster Forest: 1.33%
Saddleworth: 1.8%
Salisbury: 6.9%
Sandy Heath: 1.83%
Selkirk: 6%
Sheffield: 1%
Stockland Hill: 1%
Storeton: 2550%
Sudbury: 2.01%
Sutton Coldfield: 0.8%
Tacolneston: 2.66%
The Wrekin: 1%
Torosay: 0.62%
Tunbridge Wells: 1%
Waltham: 1.8%
Wenvoe: 1.16%
Whitehawk Hill: 3.67%
Winter Hill: 1.83%



Help with Freeview, aerials?
How do I get a test card with Freeview1
I would like to know if it is possible to receive UK terrestrial Freeview servic2
I have been told I would receive too much singal from my Freeview tansmitter as 3
Can my Freeview box receive more than one BBC and ITV region?4
Is it true that my 87 year old mother is entitled to a FREE upgrade when the ana5
[][][
In this section
Should the UK close down the TV networks to allow for more mobile broadband? 1
UK Digital switchover ends - Northern Ireland completes on 24th October 20122
The last day of analogue television in the UK - goodbye PAL3
2 days left of analogue television - goodbye teletext4
3 days of analogue to go - goodbye to NICAM 7285
Changes to Saorview frequencies and power levels, 24th October 20126

Comments
Sunday, 1 May 2011
J
Jerry Brett
5:39 PM
Sudbury

Where do I check whether my box meets current standards? It's less than 2 years old so I'll be pretty hacked if it doesn't.
Manually tuned it yesterday. 5 channels are 100% quality. The 6th was all over the place. That's the one carrying C4, C5, More4 etc.
Other users have similar problems but use SKY to get round it.
Any way I can compensate for this without forking over a SKY subscription?


link to this comment
Jerry Brett's 7 posts GB
S
Steve
sentiment_satisfiedGold

7:59 PM

... Sudbury digital TV transmitter | ukfree.tv - independent free digital TV advice

Jerry - you might do better asking here, as other locals may see it.

Looks like they are doing much mucking about prior to analogue switchoff in July, when power will increase and probably solve your problems. (LL145HD)

link to this comment
Steve's 1,172 posts GB
S
Steve
sentiment_satisfiedGold

8:03 PM
Wrexham

PS there is a list of bad boxes on here somewhere if you hunt around - though as yourse works some doubt if that's it - more of a yes/no issue!

link to this comment
Steve's 1,172 posts GB
Wednesday, 4 May 2011
Briantist
sentiment_very_satisfiedOwner

7:37 AM

Jerry Brett: The list of boxes that do not work after switchover are here - TVs and boxes that do not support the 8k-mode | ukfree.tv - independent free digital TV advice .

link to this comment
Briantist's 38,844 posts GB
Sunday, 8 May 2011
J
Jerry Brett
4:39 PM
Sudbury

Thanks guys. I did wonder if my problems had something to do with switch over fiddling and diddling. I checked my box on your link Brian and the 9200 is listed but the 9300 isn't. So I guess I may have to put up and shut up for now. At least the programmes I'm missing will probably be repeated after switch over and C5 repeats much of its content on 5USA and 5* a few days later and I can get both of those clear as crystal. Heigh ho...

link to this comment
Jerry Brett's 7 posts GB
M
Mike Dimmick
sentiment_very_satisfiedPlatinum

11:24 PM

The 9200 definitely works after switchover and I don't see any reason why the revised and updated 9300 shouldn't. Your transmitter hasn't switched yet.

You're very close to a major transmitter - it's possible that you have too much signal. You say you don't have a booster - try adding an attenuator. You should aim for a maximum of 50% signal strength on these Humax boxes - the calibration is way off. Note that Sudbury post-DSO signal levels will be much louder than now.

Mux 2 transmits on two different frequencies, C56 and C68, which are transmitted in different directions. Try the other one. Your box might have tuned in C56 when you're in the C68 area, if it chooses the first version it finds. Look for another version around channel 800 in the guide - if that's better, see if you can swap them over.

C68 is right up at the top end of the frequency range. If you didn't have a Group E aerial fitted, it might not work very well - an original analogue aerial would be Group B and has very little or even negative gain at C68. You would need a Group E aerial to get all the services reliably after switchover as well.

Finally, if damp gets into cables, it increases the loss at higher frequencies much more than at lower ones. That could be causing a problem for Mux 2 but not the others.

link to this comment
Mike Dimmick's 2,486 posts GB
Monday, 9 May 2011
S
Steve
sentiment_satisfiedGold

3:26 PM
Wrexham

Jerry - I know nothing about these things but wonder if a box 9300 might be a variant of 9200, so also bad. Think worth checking!

link to this comment
Steve's 1,172 posts GB
Thursday, 12 May 2011
R
Rob
8:22 PM

Hi, i recently built an extension and put a new digital samsung lcd in there. I ran a cable from my analogue booster in the attic to the t.v. This booster feeds all my digital t.v's in the house and all work fine. When i came to tune the new telly i found that it would not pick up any digital channels but picked up perfectly the analogue channel that feeds sky into the other t.v's. I checked the t.v is working by connecting it to a seperate room and it picked up all the digital channels and analogue sky channel. I'm confused, anyone out there going to brighten my day.

link to this comment
Rob's 1 post GB
S
Steve
sentiment_satisfiedGold

9:40 PM
Wrexham

Rob - odd!

Have you tried one of the other TVs in the conservatory?

And tried disconnecting the sky feed?

If still nothing, suspect summat wrong with wiring or splitter.

Try switching the connections out of the booster and see if the problem moves.



link to this comment
Steve's 1,172 posts GB
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.